SCIENCE CITATION INDEX (SCI) TARAFINDAN TARANAN ULUSLARARASI HAKEMLİ DERGİLERDE YAYIMLANAN MAKALELER

1) S. Yagmur, S. Dogan, M. H. Aksoy, I. Goktepeli, M. Ozgoren, “Comparison of flow characteristics around an equilateral triangular cylinder via PIV and Large Eddy Simulation methods”, Flow Measurement and Instrumentation, vol. 55, pp. 23-36, June 2017.

2) S. Yagmur, S. Dogan, M. H. Aksoy, I. Goktepeli, “Turbulence modeling approaches on unsteady flow structures around a semi-circular cylinder”, Ocean Engineering, vol. 200, pp. 1-14 (107051), March 2020.

3) I. Goktepeli, S. U. Atmaca, A. Cakan, “Investigation of heat transfer augmentation between the ribbed plates via Taguchi approach and Computational Fluid Dynamics”, Journal of Thermal Science, vol. 29(3), pp. 647-666, June 2020.

4) I. Goktepeli, S. U. Atmaca, S. Yagmur, “Visualization of flow characteristics between the ribbed plates via Particle Image Velocimetry”, Thermal Science, vol. 25(1A), pp. 171-179, January 2021.

5) I. Goktepeli, S. U. Atmaca, “Examination of air flow characteristics over an open rectangular cavity between the plates”, International Journal of Aeroacoustics, vol. 22(3-4), pp. 351-370, June 2023.

6) M. H. Aksoy, I. Goktepeli, M, Ispir, A. Cakan, “Reconstruction of flow field with missing experimental data of a circular cylinder via machine learning algorithm“, Physics of Fluids, vol. 35(11), pp. 1-21 (114110), November 2023.

7) M. H. Aksoy, I. Goktepeli, M, Ispir, A. Cakan, “Machine learning approach for flow fields over a circular cylinder based on Particle Image Velocimetry measurements”, Measurement, vol. 223, pp. 1-16 (113699), December 2023.

8) M. H. Aksoy, S. Yagmur, S. Dogan, I. Goktepeli, M, Ispir, “Experimental study on cylinder wake control using forced rotation“, Journal of Wind Engineering and Industrial Aerodynamics, vol. 246, pp. 1-15 (105662), March 2024.

9) S. Yagmur, M. H. Aksoy, S. Dogan, I. Goktepeli, M, Ispir, “The groove effect on wake characteristics of rotating cylinders“, Physics of Fluids, vol. 36(7), pp. 1-13 (074107), July 2024.

10) I. Goktepeli, “Drag reduction by the effect of rounded corners for a square cylinder“, Physics of Fluids, vol. 36(9), pp. 1-11 (094108), September 2024.

11) I. Goktepeli, S. U. Atmaca, “Comparison of thermophysical property models of nanofluids for thermal performance in a microchannel“, Heat Transfer Research, vol. 56(2), pp. 1-15, January 2025.

 

DİĞER ULUSLARARASI HAKEMLİ DERGİLERDE YAYIMLANAN MAKALELER

1) Y. Ozdemir, M. Ozgoren, I. Goktepeli, “Energy analysis for an air-conditioning system of a commercial aircraft: Case study for Airbus A330”, International Journal of Energy Applications and Technologies, vol. 3(2), pp. 60-67, December 2016.

2) S. Dogan, S. Yagmur, I. Goktepeli, M. Ozgoren, “Assessment of turbulence models for flow around a surface-mounted cube”, International Journal of Mechanical Engineering and Robotics Research, vol. 6(3), pp. 237-241, May 2017.

3) M. A. H. Hayder, I. Goktepeli, S. Yagmur, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, “Experimental investigation of flow structures around a torpedo-like geometry placed in a boundary layer flow”, Universal Journal of Mechanical Engineering, vol. 6(1), pp. 1-8, January 2018.

4) I. Goktepeli, S. U. Atmaca, “Numerical examination of heat transfer augmentation between the plates with square cross-sectional ribs for the staggered arrangement“, Kocaeli Journal of Science and Engineering, vol. 3(2), pp. 33-40, November 2020.

5) I. Goktepeli, S. U. Atmaca, “Computational study on the effect of the staggered ribs on heat transfer phenomena between the horizontal plates”, Hittite Journal of Science and Engineering, vol. 8(1), pp. 7-17, March 2021.

6) S. U. Atmaca, I. Goktepeli, A. Ates, “The effects of nanofluids on forced convection heat transfer inside parallel plate heated with flush mounted discrete heater sources“, International Journal of Civil, Mechanical and Energy Science, vol. 9(1), pp. 1-9, January-February 2023.

7) I. Goktepeli, S. U. Atmaca, “Numerical modeling of backward-facing step flow via Computational Fluid Dynamics“, Journal of Scientific Reports – A, vol. 54, pp. 176-193, September 2023.

 

ULUSLARARASI BİLİMSEL TOPLANTILARDA SUNULAN VE BİLDİRİ KİTABINDA BASILAN BİLDİRİLER

1) M. Ozgoren, S. Yagmur, S. Dogan, M. H. Aksoy, E. Canli, I. Goktepeli, “Flow characteristics around a vortex flow meter via CFD and PIV methods”, 10th Pacific Symposium on Flow Visualization and Image Processing (PSFVIP-10), pp. 1-16 (Paper 245), 15-18 June 2015, Naples/Italy.

2) S. Yagmur, I. Goktepeli, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, “Experimental investigation of attack angle effect on a torpedo-like geometry via PIV”, 8th International Ege Energy Symposium and Exhibition (IEESE8), pp. 601-605, 11-13 May 2016, Afyonkarahisar/Türkiye.

3) I. Goktepeli, S. Yagmur, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, “Experimental and numerical investigation of flow characteristics of a torpedo-like geometry”, 8th International Ege Energy Symposium and Exhibition (IEESE8), pp. 606-611, 11-13 May 2016, Afyonkarahisar/Türkiye.

4) I. Goktepeli, S. Yagmur, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, “Experimental determination of drag coefficients for torpedo-like geometries in an open wind tunnel“, 3rd International Conference on Advanced Technology and Sciences (ICAT’16), pp. 949-955, 1-3 September 2016, Konya/Türkiye.

5) Y. Ozdemir, M. Ozgoren, I. Goktepeli, “Energy analysis for an air-conditioning system of a commercial aircraft: Case study for Airbus A330“, 3rd International Conference on Advanced Technology and Sciences (ICAT’16), pp. 973-979, 1-3 September 2016, Konya/Türkiye.

6) S. Yagmur, I. Goktepeli, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, “Experimental investigation of attack angle effect on flow structure around leading and trailing edges of a torpedo-like geometry”, 2nd Global International Conference on Innovation in Marine Technology and the Future of Maritime Transportation (GMC2016), pp. 57-66, 24-25 October 2016, Mugla/Türkiye.

7) M. A. H. Hayder, I. Goktepeli, S. Yagmur, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, “Experimental investigation of flow structures around a torpedo-like geometry placed in a boundary layer flow”, 2nd Global International Conference on Innovation in Marine Technology and the Future of Maritime Transportation (GMC2016), pp. 639-649, 24-25 October 2016, Mugla/Türkiye.

8) S. Yagmur, I. Goktepeli, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, M. Kaynarcalioglu, “Investigation of flow characteristics around a semi-elliptical nose shaped cylindrical geometry at lower Reynolds numbers and different angles of attack”, 2nd Global International Conference on Innovation in Marine Technology and the Future of Maritime Transportation (GMC2016), pp. 650-659, 24-25 October 2016, Mugla/Türkiye.

9) S. Yagmur, I. Goktepeli, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, “Investigation on hydrodynamic characteristics of a torpedo-like geometry via different turbulence models and PIV”, 2nd Global International Conference on Innovation in Marine Technology and the Future of Maritime Transportation (GMC2016), pp. 660-673, 24-25 October 2016, Mugla/Türkiye.

10) I. Goktepeli, S. Yagmur, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, “Comparison of elliptical cross-sectional torpedo-like geometries with three-appendaged and bare hulls via PIV”, 1st International Mediterranean Science and Engineering Congress (IMSEC 2016), pp. 4900-4906, 26-28 October 2016, Adana/Türkiye.

11) S. Yagmur, I. Goktepeli, M. Ozgoren, F. Kose, L. A. Kavurmacioglu, “Numerical investigation of attack angle effect on a torpedo-like geometry”, 1st International Mediterranean Science and Engineering Congress (IMSEC 2016), pp. 4907-4915, 26-28 October 2016, Adana/Türkiye.

12) S. Dogan, S. Yagmur, I. Goktepeli, M. Ozgoren, “Assessment of turbulence models for flow around a surface-mounted cube”, 5th International Conference on Power Science and Engineering (ICPSE 2016), pp. 1-5 (Paper P59), 14-17 December 2016, Venice/Italy.

13) I. Goktepeli, S. Yagmur, M. Ozgoren, F. Kose, “Numerical investigation of flow over elliptical torpedo-like geometries with three-appendaged and bare hulls”, 2nd International Conference on Energy Systems (ICES-2016), pp. 137-143, 21-23 December 2016, Istanbul/Türkiye.

14) S. Yagmur, I. Goktepeli, M. Ozgoren, F. Kose, “Numerical examination of o-ring effect on passive flow control for a torpedo-like geometry”, 2nd International Conference on Energy Systems (ICES-2016), pp. 166-172, 21-23 December 2016, Istanbul/Türkiye.

15) I. Goktepeli, S. U. Atmaca, “Numerical investigation of heat transfer characteristics between horizontal parallel plates for turbulent flow”, 2nd International Defence Industry Symposium (IDEFIS 2017), pp. 199-206, 6-8 April 2017, Kirikkale/Türkiye.

16) I. Goktepeli, S. U. Atmaca, “Evaluation of turbulence models for heat transfer in horizontal parallel plates”, International Workshop on Mathematical Methods in Engineering (MME 2017), pp. 1-10, 27-29 April 2017, Ankara/Türkiye.

17) I. Goktepeli, S. U. Atmaca, “Numerical study on heat transfer enhancement with fins between horizontal plates”, International Conference on Advances and Innovations in Engineering (ICAIE 2017), pp. 510-516, 10-12 May 2017, Elazig/Türkiye.

18) I. Goktepeli, S. U. Atmaca, “Numerical investigation of the flow characteristics between the finned plates”, International Conference on Energy Systems Engineering (ICESE’17), pp. 471-475, 2-4 November 2017, Karabuk/Türkiye.

19) M. N. S. Shareef, I. Goktepeli, S. U. Atmaca, “Determination of heat transfer and fluid flow characteristics in a parallel plate channel with v-shaped corrugation”, International Congress of Climate Change: Sustainability on Health, Agriculture, Food and Livestock Policies (ICSAFL 2018), pp. 8-21, 3-5 September 2018, Amsterdam/Netherlands.

20) S. U. Atmaca, I. Goktepeli, “Numerical investigation of 2D lid driven caviy flow”, 3rd International Energy and Engineering Congress (IEEC/UEMK 2018), pp. 1143-1147, 18-19 October 2018, Gaziantep/Türkiye.

21) I. Goktepeli, S. U. Atmaca, S. Yagmur, “Experimental investigation of flow characteristics between the plates with square cross-sectional ribs via Particle Image Velocimetry”, 1st International Conference on Advances in Mechanical and Mechatronics Engineering (ICAMMEN 2018), pp. 470-475, 8-9 November 2018, Ankara/Türkiye.

22) I. Goktepeli, S. U. Atmaca, “Numerical examination of heat transfer augmentation between the plates with square cross-sectional ribs for the staggered arrangement”, 22nd Congress on Thermal Science and Technology (CTST/ULIBTK’19), pp. 189-199, 11-14 September 2019, Kocaeli/Türkiye.

23) S. U. Atmaca, I. Goktepeli, “Effects of initial temperature and pressure of auto-ignition time for methane/air mixture”, Anatolian 5th International Applied Science Congress, pp. 154-162, 26-27 December 2020, Diyarbakir/Türkiye.

24) I. Goktepeli, S. U. Atmaca, “Numerical analysis of laminar heat transfer for nanofluids in a microchannel”, 6th International Conference on Engineering Technologies (ICENTE’22), pp. 297-302, 17-19 November 2022, Konya/Türkiye.

25) I. Goktepeli, S. U. Atmaca, “Numerical investigation of laminar heat transfer with viscous dissipation for nanofluids in a microchannel”, 24th Congress on Thermal Science and Technology (CTST/ULIBTK’23), pp. 544-550, 6-8 September 2023, Ankara/Türkiye.

26) M. Ispir, I. Goktepeli, M. H. Aksoy, “Solar-powered farming: Evaluating the viability of PV water pumping in Turkish agriculture”, 7th International Scientific and Professional Conference (POLITEHNIKA 2023), pp. 1045-1051, 15 December 2023, Belgrade/Serbia.

27) S. U. Atmaca, I. Goktepeli, “Numerical solution of Reynolds equation”, 2nd International Symposium on Current Academic Researches, pp. 832-840, 28-30 December 2023, Bolu/Türkiye.

28) I. Goktepeli, “Numerical study on flow characteristics for a NACA 0012 airfoil”, 2nd International Conference of Aeronautics and Astronautics (ICAA’24), pp. XX-XX, 6-8 November 2024, Konya/Türkiye.

 

ULUSAL BİLİMSEL TOPLANTILARDA SUNULAN VE BİLDİRİ KİTABINDA BASILAN BİLDİRİLER

1) S. Yağmur, İ. Göktepeli, M. Özgören, F. Köse, L. A. Kavurmacıoğlu, “Torpido benzeri geometri çevresindeki akış yapısının sayısal olarak incelenmesi”, 20. Ulusal Isı Bilimi ve Tekniği Kongresi (ULIBTK’15), s. 794-805, 2-5 Eylül 2015, Balıkesir/Türkiye.

2) İ. Göktepeli, S. Yağmur, M. Özgören, F. Köse, L. A. Kavurmacıoğlu, “Eliptik kesitli torpido benzeri geometrinin serbest yüzey etkisi altında akış yapısının deneysel olarak araştırılması”, 20. Ulusal Isı Bilimi ve Tekniği Kongresi (ULIBTK’15), s. 1368-1376, 2-5 Eylül 2015, Balıkesir/Türkiye.

3) İ. Göktepeli, Ş. U. Atmaca, S. Yağmur, “Yatay plakalar arasındaki engelleyicilerin akış karakteristiklerine etkisi”, 21. Ulusal Isı Bilimi ve Tekniği Kongresi (ULIBTK’17), s. 68-76, 13-16 Eylül 2017, Çorum/Türkiye.

4) İ. Göktepeli, Ş. U. Atmaca, “Açık oyuklu kanaldaki akış yapısının sayısal olarak incelenmesi”, 9. Ulusal Konya Ovası Projesi (KOP) Bölgesel Kalkınma Sempozyumu, s. 177-186, 24-26 Ekim 2022, Konya/Türkiye.